Service Manual

Cleaning, Sanitation and Maintenance
This ice system requires three types of
maintenance:
•
Remove the build up of mineral scale from the ice machine’s water system and sensors.
•
Sanitize the ice machine’s water system and the ice storage bin or dispenser.
•
Clean the air cooled condenser.
It is the User’s responsibility to keep the ice machine and ice storage bin in a sanitary condition. Without
human intervention, sanitation will not be maintained. Ice machines also require occasional cleaning of
their water systems with a specifically designed chemical. This chemical dissolves mineral build up that
forms during the ice making process.
Sanitize the ice storage bin as frequently as local health codes require, and every time the ice machine is
cleaned and sanitized.
The ice machine’s water system should be cleaned and sanitized a minimum of twice per year.
1. Remove the front panel.
2. Remove the evaporator cover.
3. If the machine is operating, push and release
the Harvest button. When the machine
completes the Harvest cycle it will stop. If the
bin is full (b shows in display) push and release
the Off button.
4. Remove all ice from the storage bin or
dispenser.
5. Push and release the Clean button. The yellow
Clean light will blink and the display will show
C. The machine will drain the reservoir and
refill it. Go onto the next step when the
reservoir has filled.
6. Pour 24 ounces of Scotsman Clear 1 nickel
safe scale remover into the reservoir.
7. Allow the ice machine cleaner to circulate in
the water system for at least 10 minutes.
8. Push and release the Clean button again. The
yellow Clean light will be on continuously and
the machine will drain and refill the reservoir to
flush out the ice machine cleaner and residue.
9. Allow the drain and refill process to continue
for at least 20 minutes.
10. Push and release the Off button. The clean
cycle will stop and the display will show O.
Note: If unit has not been de-scaled for an
extended period of time and significant mineral
scale remains, repeat steps5-10.
11. Mix a cleaning solution of 1 oz of ice machine
cleaner to 12 ounces of water.
12. Remove water distributors from ice machine.
Inspect each distributor for restricted orifice
holes. Be sure all holes are full open.
13. Locate ice thickness sensor (under left
curtain). Squeeze mounting legs together to
release sensor. Wash the metal surfaces of the
sensor and the adjustment screw with ice
machine cleaner solution. Also wash the water
distributor and curtain with the ice machine
cleaner solution.
Prodigy Eclipseä 1200, 1400, 1800, 2000
August 2008
Page 38
Scotsman Scale Remover
contains acids.
Acids may cause burns. If
concentrated cleaner comes in
contact with skin, flush with
water. If swallowed, do NOT
induce vomiting. Give large
amounts of water or Milk.
Call Physician immediately.
Keep out of the reach of
children.
Curtain