User's Manual

C0830/C1030 - uses 1 kit
C1448/C1848/C2148 – requires 2 kits per unit
•
Remove front panel.
•
Shut unit off.
•
Remove evaporator cover.
•
Remove existing curtain(s).
•
Disconnect curtain switch from existing mounting.
•
Install curtain switch in new location.
•
Attach curtain switch to new location using two #6 screws from kit.
•
Secure wire to refrigerant tube as shown.
•
Repeat for opposite side on two evaporator models.
•
Mount new curtain assemblies in ice machine.
•
Move curtain(s) in and out and confirm curtain switch light works properly.
•
Reinstall all panels and restart unit.
17-3346-01
Curtain Switch in New Location
Magnet