Installation and User’s Manual for Remote Low Side Modular Flaked and Nugget Ice Machines Prodigy Plus D Series Models F1222L, F1322L, N0922L and N1322L
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Introduction This ice machine is the result of years of experience with flaked and nugget ice machines. The latest in electronics has been coupled with the time tested Scotsman flaked ice system to provide reliable ice making and the features needed by customers. The features include simple conductivity water level sensing, evaporator clearing at shut down, photo-eye sensing bin control and the ability to add options.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Installation: This machine is designed to be used indoors, in a controlled environment. Operation outside the limits listed here will void the warranty. Air temperature limits Ice maker Minimum 50oF. Maximum 100oF. Warranty Information The warranty statement for this product is provided separately from this manual. Refer to it for applicable coverage. In general warranty covers defects in material or workmanship.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Location: While the machine will operate satisfactorily within the air and water temperature limits, it will operate more efficiently when those temperatures are nearer the lower limits. Avoid locations that are hot, dusty, greasy or confined. Options The standard machine will make ice until ice fills the bin and blocks an infrared light beam inside the bottom of the machine.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Cabinet Layout 55.4 21.81 33.9 13.35 3/8"FLARE MACHINE WATER INLET 47.8 18.81 6.7 2.63 4 1.59 42.8 16.86 36.5 14.36 3/4" FPT DRAIN BACK VIEW 120 VOLT CORD 5/8" O.D. REMOTE SUCTION CONNECTION 3/8" O.D. REMOTE LIQUID LINE CONNECTION 61 24.00 REF. 41.9 16.50 55.9 22.00 REF. PLAN VIEW 31.8 12.50 16.5 6.48 ICE DROP OPENING 61 24.00 LEFT SIDE VIEW 10.9 4.30 7.4 2.92 ULTRA SONIC BIN LEVEL SENSOR OPTIONAL 7.1 2.81 [68.6] 27.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Unpacking Remove the carton from the skid. Check for hidden freight damage, notify the carrier immediately if any is found. Retain the carton for the carrier’s inspection. Panel Removal The machine is not bolted to the skid. If strapped remove the strap. Place on Bin or Dispenser If reusing an existing bin, be sure that the bin is in good shape and that the gasket tape on the top is not torn up.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Water The water supply for ice making must be cold, potable water. There is a single 3/8” male flare potable water connection on the back panel. Backflow The design of the float valve and reservoir prevents potable water backflow by means of a 1" air gap between the reservoir's maximum water level and the float valve water inlet orifice. Drain There is one ¾” FPT condensate drain fitting at the back of the cabinet.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Electrical The machine includes a power cord, connect to the proper power supply. A separate circuit is recommended to avoid unintended shut downs. If a dedicated condensing unit is connected to this machine, it will have a separate power supply. Do not use an extension cord. Follow all local and national codes.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Refrigeration Refrigeration Installation: BTUH Capacity Requirements Model N0922L, F1222L N1322L, F1522L BTUH 5,000 7,200 Connections Condensing Units The liquid and suction fittings on the back of the cabinet are stubs. The liquid line size is 3/8" OD. The suction line size is 5/8" OD. Model Use Condensing Unit 1. Recover holding charge N0922L or F1222L N1322L or F1522L 2. Cut the stubs off. NME954-RHS-A/C None - rack only 3.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Final Check List After Connections Control Operation 1. Wash out the bin. If desired, the interior of the bin could be sanitized. Use and Operation 2. Locate the ice scoop (if supplied) and have it available for use when needed. Once started, the ice machine will automatically make ice until the bin or dispenser is full of ice. When ice level drops, the ice machine will resume making ice. Final Check List: 1.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Initial Start Up 1. Turn the water supply on. • All models require sensor cleaning. 2. Switch the electrical power on. Confirm voltage is correct for the model. • All models require a top bearing check. 3. Push and release the On button. The machine will start up in about two minutes. The liquid line valve will open and liquid refrigerant will flow into the machine.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Scale removal Note: Following this procedure will reset the de-scale and sanitize light. 1. Remove front panel. 2. Push and release the Off button. 3. Remove ice from bin or dispenser. 4. Turn the water supply to the ice machine OFF. 5. Drain the water and evaporator by disconnecting the leg of the hose connected to the water sensor and draining it into the bin. Return the hose to its original position. 6.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Check Top Bearing This task should only be done by a qualified service technician The bearing in the breaker should be checked at least two times per year. Check the bearing by: 1. Removing the bail clamp and ice chute cover Bail Clamp 3. Removing the water shed & unscrewing the breaker cover (left hand threads). 2. Unscrewing the ice sweep 4. Inspect the top of the bearing.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Bearing Service This task should only be done by a qualified service technician If the bearing only needs grease, or to confirm the quality of the grease low in the bearing, inject grease into the lower part of the bearing using Scotsman Drip Pan grease needle pn 02-3559-01 and Scotsman bearing grease cartridge, pn A36808-001. Be sure to inject grease evenly and thoroughly.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Options Vari-Smart Dispenser applications - Optional adjustable ice level control (KVS) Nugget ice only: Set the adjustment knob to either the first or second position CW after the maximum fill position. When this option is present there is an adjustment post and an additional indicator light to the right of the four indicator lights mentioned earlier.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual Service Diagnosis Symptom No ice Probable Cause No power Code 3: No water Status light is off Code 1: No ice sensed Code 2: Auger motor draws too many amps, controller shuts unit off.
N0922L, N1322L, F1222L, F1522L D Series Remote Low Side User Manual What to do before calling for service 2. Has power been shut off to the ice machine? If yes, the ice machine will automatically restart when Normal Operation Ice The machine will make either flaked or nugget ice, depending upon the model. The ice will be produced continuously until the bin is full. Heat power is restored. 3.
SCOTSMAN ICE SYSTEMS 775 Corporate Woods Parkway Vernon Hills, IL 60061 800-726-8762 www.scotsman-ice.