User's Manual
N0922L, N1322L, F1222L, F1522L
D Series Remote Low Side User Manual
October 2014
Page 7
Water
The water supply for ice making must be cold, potable
water. There is a single 3/8” male are potable water
connection on the back panel.
Backow
The design of the oat valve and reservoir prevents
potable water backow by means of a 1" air gap
between the reservoir's maximum water level and the
oat valve water inlet orice.
Drain
There is one ¾” FPT condensate drain tting at the
back of the cabinet.
Tubing
Connect the potable water
supply to the potable water
tting, 3/8” OD copper tubing or
the equivalent is recommended.
Connect the drain tube to the
condensate drain tting. Vent this
drain tube.
Do not Tee ice machine drains
into the drain tube from the ice
storage bin or dispenser. Back
ups could contaminate and
/ or melt the ice in the bin or
dispenser.
Follow all local and national
codes for tubing, traps and air
gaps.
Potable Water Inlet
Condensate Drain