Service manual

FOR THE INSTALLER
The FM1200 is designed to fit the following
Scotsman storage bins:
B590 and extensions (with bin top KBT18)
BH800 using bin top KBT15 (one unit).
BH800 (two units, no bin top required).
BH1000 using bin top KBT16.
When installing a new system, check to be
sure that you have everything you need
before beginning:
Correct Bin
Correct Ice Machine
Correct Bin Top (if required)
All kits, legs, and information required for
the specific job.
Installation Limitations:
This ice system is designed to be installed
indoors, in a controlled environment:
Min Max
Air Temperature 50
0
F 100
0
F
Water Temperature 40
0
F 100
0
F
Water Pressure 20 PSI 80 PSI
Voltage -5% +10%
(Compared to the nameplate)
Operating the machine outside of the
limitations is misuse and can void the warranty.
Model Number
FM1200AE-3A
FM1200WE-3A
FM1200AE-32A
FM1200WE-32A
Dimensions
(w/o bin)
H X W X D
27" x 21" x 24"
same
same
same
Basic
Electrical
208-230/60/3
same
208-230/60/1
same
Ice Type
FLAKE
same
same
same
Condenser
Type
Air
Water
Air
Water
Minimum
Circuit
Ampacity
13.4
12.9
14.6
14
Max
Fuse
Size
20
20
20
20
Comp.
H.P.
1.5
1.5
1.5
1.5
The normal finish for the ice machine is
enamel-sandalwood. A stainless steel panel
kit, SPKFM21 may be field installed to convert
the unit to a stainless steel finish.
Note: Minimum Circuit Ampacity is used to determine wire size and type per national electric code.
ELECTRICAL
INLET
3"
2.1"
5.7"
WATER INLET
3/8" FLARE
DRAIN
3/4" FPT
BACK VIEW: AIR COOLED
5.25"
9.5"
Note: Allow 6"
behind and 6"
above either unit
for air circulation,
utility connections,
and service.
ELECTRICAL
INLET
WATER
INLET
7.3"
5.25"
3"
3.4"
7.46"
Condenser Inlet 3/8" FPT
Condenser Drain 1/2" FPT
DRAIN
3/4" FPT
4.9"
2.9"
9.43"
BACK VIEW: WATER COOLED
SPECIFICATIONS: ICE MAKER
FM1200
October, 1991
Page 2