User and Installation Manual for Modular Flaked & Nugget Ice Machines Models F0822, F1222, F1522, N0622, N0922 and N1322 Remote Low Side
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Introduction This ice machine is the result of years of experience with flaked and nugget ice machines. The latest in electronics has been coupled with the time tested Scotsman flaked ice system to provide reliable ice making and the features needed by customers. The features include simple conductivity water level sensing, evaporator clearing at shut down, photo-eye sensing bin control and the ability to add options.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Installation: The quality of the water supplied to the ice machine This machine is designed to be used indoors, in a controlled environment. Operation outside the limits will have an impact on the time between cleanings and ultimately on the life of the product. Water can listed here will void the warranty. contain impurities either in suspension or in solution. Suspended solids can be filtered out.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Location: While the machine will operate satisfactorily within Dispenser compatibility the air and water temperature limits, it will operate more efficiently when those temperatures are Only nugget ice models may be used with ice nearer the lower limits. Avoid locations that are hot, dispensers. Flaked ice is not dispensable. dusty, greasy or confined.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Cabinet Layout Note: Bin Top Cut-outs for drop zone should include ultrasonic sensor location 58.1 22.89 55.9 22.00 REF. [68.6] 27.00 31.8 12.50 ULTRA SONIC BIN LEVEL SENSOR OPTIONAL 61 24.00 REF. 55.9 22.00 PLAN VIEW 41.9 16.50 FRONT VIEW ICE DROP OPENING 7.4 2.92 7.1 2.81 42.8 16.86 16.5 6.48 120 VOLT CORD 36.5 14.36 10.9 4.30 5/8" O.D. REMOTE SUCTION CONNECTION 3/8"FLARE MACHINE WATER INLET 3/8" O.D.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Unpacking Remove the carton from the skid. Check for hidden Panel Removal freight damage, notify the carrier immediately if any is found. Retain the carton for the carrier’s 1. Locate and loosen the two screws at the front inspection. edge of the top panel. The machine is not bolted to the skid. If strapped remove the strap. 2. Pull the front panel out at the top until it clears the top panel. Place on Bin or Dispenser 3.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Water The water supply for ice making must be cold, potable water. There is a single 3 8” male flare potable water connection on the back panel. Backflow The design of the float valve and reservoir prevents potable water backflow by means of a 1" air gap between the reservoir's maximum water level and the float valve water inlet orifice. Drain There is one ¾” FPT condensate drain fitting at the back of the cabinet.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Electrical The machine includes a power cord, connect to the proper power supply. A separate circuit is recommended to avoid unintended shut downs. If a dedicated condensing unit is connected to this machine, it will have a separate power supply. Do not use an extension cord. Follow all local and national codes.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Refrigeration Roof Attachment BTUH Capacity Requirements Model BTUH N0622L or F0822L 4,000 N0922L, F1222L 5,000 N1322L 7,200 Install and attach the remote condensing unit to the roof of the building, using the methods and practices of construction that conform to the local building codes, including having a roofing contractor secure the condenser to the roof.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Final Check List After Connections Control Operation 1. Wash out the bin. If desired, the interior of the bin could be sanitized. Use and Operation Once started, the ice machine will automatically make ice until the bin or dispenser is full of ice. When ice level drops, the ice machine will resume making ice. 2. Locate the ice scoop (if supplied) and have it available for use when needed. Final Check List: 1.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Initial Start Up 1 Turn the water supply on. • All models need scale removed from the 2 Switch the electrical power on. Confirm voltage is correct for the model. 3 Push and release the On button. The machine will start up in about two minutes. The liquid line valve will open and liquid refrigerant will flow into the machine.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Scale removal 12. Drain the water reservoir and evaporator by disconnecting the leg of the hose connected to the water sensor and draining it into the bin or a bucket. Return the hose to its original position. Discard or melt all ice made during the previous step. Note: Following this procedure will reset the de-scale and sanitize light. 1 Remove front panel. 2 Push and release the Off button.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Check Top Bearing This task should only be done by a qualified service technician The bearing in the breaker should be checked at least two times per year. Check the bearing by: 1 Removing the bail clamp and ice chute cover Bail Clamp 3 2 Removing the water shed & unscrewing the breaker cover (left hand threads). Unscrewing the ice sweep Inspect the top of the bearing.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Bearing Service This task should only be done by a qualified service technician If the bearing only needs grease, or to confirm the quality of the grease low in the bearing, inject grease into the lower part of the bearing using Drip Pan Scotsman grease needle pn 02-3559-01 and Scotsman bearing grease cartridge, pn A36808-001. Be sure to inject grease evenly and thoroughly.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Options Vari-Smart Dispenser applications Nugget ice only: we Lo r Optional adjustable ice level control (KVS) KVS we Lo r Bin Set the adjustment knob to either the first or second position CW after the maximum fill position. Bin Full Adjust Ice Level 02-4294-01 Rev. A. Full Adjust Ice Level 02-4294-01 Rev. A.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual Service Diagnosis Symptom Probable Cause Possible Correction No power Check that ice machine and condensing unit, if used, both have power. If power light is out, check transformer. Code 3: No water Restore water Status light is off Push and release ON switch Code 1: No ice sensed Check for ice flow down chute.
N0622L, F0822L, N0922L, F1222L, N1322L, F1522L Remote Low Side User's Manual What to do before calling for service automatically restart within minutes after water begins to flow to it. Normal Operation Ice The machine will make either flaked or nugget ice, depending upon the model. The ice will be produced continuously until the bin is full. Heat Most heat is exhausted at the remote condensing unit or at the rack; the ice machine should not generate significant heat. 2.
SCOTSMAN ICE SYSTEMS 775 Corporate Woods Parkway, Vernon Hills, IL 60061 800-533-6006 www.scotsman-ice.