Installation and User's Manual
Table Of Contents
- Table of Contents
- Specifications Page 2
- Cabinet Layout Page 3
- Air flow Page 4
- Water Quality Page 5
- Door Covering Page 6
- Door swing change Page 8
- Installation: Water & Drain Page 9
- Gravity Drain Page 10
- Electrical Page 11
- Use Page 12
- How to clean the condenser and winterize. Page 13
- How to remove scale from the ice making system. Page 14
Air flow
The machine takes in room temperature air at the
lower right front and forces warm air out the lower
left front. Restricting the airflow will adversely affect
the ability of the ice machine to make ice.
Clearance requirements: 0 inches at the top, 2
inches at the rear and an 1/8 inch at each side.
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of agencies like U.L.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
June 2010
Page 4
SCCG50 & SCCP50
Installation and User's Manual
Air IntakeWarm Air Out
Control Panel
Ice Making
Area
Model and
Serial Number
Tag