TM Wrightsville Bathroom Vanity 36-IN Vanity Base and Top ( 36-IN W x 22-IN D x 35-IN H) Date Purchased _______________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-571-1044 9 a.m. - 5 p.m., EST, Monday-Friday. www.greentouchhome.
TM MODEL NUMBER DESCRIPTION 1116VB-36-201 1116VB-36-202 1116VB-36-242 36" White Finish Vanity Base & Sink 36" Mahogany Finish Vanity Base & Sink 36" Light Gray Finish Vanity Base & Sink 1116VT-36-900 1116VT-36-901 1116VT-36-905 36" Carrara Marble Top with Backsplash 36" White Quartz Top with Backsplash 36" Terrazzo Top with Backsplash 2
PACKAGE CONTENTS PART A B C DESCRIPTION Vanity Top Backsplash Sink Mounting Hardware QUANTITY CARTON 1 Box 2 of 2 1 1 Box 1 of 2 C 1 D Sink 1 E Left Door (preassembled to Vanity (A)) 1 F Right Door (preassembled to Vanity (A)) Box 2 of 2 D B F A E 1 HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE) FF Touch Up Pen Qty. 1 SAFETY INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Installation Time: 45 minutes (24 hours for adhesive to dry). Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, adhesive, power drill with drill bit, measuring tape, level.
INSTALLATION INSTRUCTIONS 3. Apply adhesive (not included) to unpolished side and bottom of backsplash (C). Position backsplash (C) on top (B) and against wall. Clean any excess adhesive before allowing to dry. 3 1 2 2 C B 4. If you need to adjust the doors, do so in the following manner. To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws. To adjust door left or right, turn screws (b) on both hinges, in or out.
INSTALLATION INSTRUCTIONS 5. To remove drawer preassembled in vanity (A). Fully extend drawers, locate plastic levers on metal glide tracks at left and right sides of drawer box, push on plastic levers on both sides at the same time, to disengage drawer box from the glides, Then gently lift the drawer up to remove it from the glide tracks. 5 A 2 1 6. To reinstall drawer into vanity (A).
CARE AND MAINTENANCE • Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product. • You can clean the vanity with a gentle, non-abrasive household cleaner. • Make sure to dry the wood immediately with a soft cloth or towel. • The ceramic sink can be cleaned using standard ceramic cleaning agents available at your local supplier. • Tips for using touch-up pen (FF): For scratches, stroke in direction of scratch; for worn areas, stroke in direction of wood grain.
REPLACEMENT PARTS FOR 1116VB-36-201 For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.
REPLACEMENT PARTS FOR 1116VB-36-202 For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.
REPLACEMENT PARTS FOR 1116VB-36-242 For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.