Installation Guide

5
INSTALLATION INSTRUCTIONS
Hardware Used
AA
Bolt x 4
3. Screw bolts (AA) into the threaded holes of
stone top (B)
Hardware Used
BB
Sink bracket x 4
CC
Nut x 4
x 4
DD
Lock Washer
4. Lower the sink brackets (BB) over the bolts
(AA) and allow to rest on the sink lip. Adjust
location of bracket to firmly grasp sink lip.
Lower lock washers (DD) over bolts (AA) and
secure with nuts (CC). Hand tighten nuts (CC)
with included wrench (EE).
DO NOT OVER TIGHTEN!
Tip: check that the sink placement is well
centered front to back and side to side of the
stone top cut out before allowing the silicone
adhesive to dry. If the sink is not centered well
unscrew sink clamps, readjust the sink position
and re-tighten the sink brackets.
Assembly is now complete, Install top with sink
to vanity cabinet.
EE
Wrench x 1
3
AA
D
B
BACK
BACK
4
1
BB
2
3
EE
CC
DD
D
B
BACK
BACK