Installation Guide

INSTALLATION INSTRUCTIONS

2. Apply silicone adhesive (not included) to

the top edge of sink (D). With the help of

another adult, lower the sink onto the back

side of the stone top. Make sure the sink

over-flow hole is facing the front of stone top.

Be sure to align the sink well with the stone top

cut out allowing for equal stone overhang on the

front, back and sides of the ceramic sink (D).

Note: To install the sink onto the top correctly,

ensure that the two "BACK" stamps on the sink

and the top are aligned on the same sides.

Use the glide lines marked on the sink and

bottom side of stone top to assist with sink

location.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and hardware contents list. If any part is missing or damaged, do not attempt

to assemble the product.

Estimated Installation Time: 45 minutes (24 hours for adhesive to dry).

Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, adhesive,

power drill with drill bit, measuring tape, level

BACK

Sink Lip

Top

BACK

1. To remove the top (B) from vanity (A), please use scissor to snip the zip ties that hold top (B)

to Vanity (A), remove the Top (B) and Backsplash (C) and place them face onto a scratch- free

surface such as a foam sheet that came in the packaging.

BACK

FRONT