TM Roveland Bathroom Mirror 28-IN Mirror ( 28-IN W x 0.75-IN D x 30-IN H) Date Purchased _______________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-571-1044 9 a.m. - 5 p.m., EST, Monday-Friday. www.greentouchhome.
TM MODEL NUMBER DESCRIPTION 2026MR-28-200 2026MR-28-201 2026MR-28-202 2026MR-28-205 2026MR-28-242 28" Dark Gray Finish Mirror 28" White Finish Mirror 28" Mahogany Finish Mirror 28" Black Oak Finish Mirror 28" Light Gray Finish Mirror 2
PACKAGE CONTENTS PART DESCRIPTION A Mirror Mounting Hanger B (preassembled to Mirror (A)) B A HARDWARE CONTENTS AA BB Anchor Qty.2 Screw Qty.2 CC Touch-up pen Qty.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install this product. WARNING • Some steps are more easily handled with two adults. CAUTION • Before installation, carefully use scissors or utility knife to cut and unwrap all parts. Make sure you DO NOT discard the hardware. • Use care when installing your new mirror; take your time and follow the installation instructions closely. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
BEFORE YOU INSTALL, MAKE A CHOICE!! OPTION 1: Vertical Mounting. OPTION 2: Horizontal Mounting.
INSTALLATION INSTRUCTIONS 1 1. Measure the distance between the holes in the mounting hangers (B) on the back of the mirror (A). B Note: The distance between the holes in the mounting hangers (B) on the back of the mirror (A) is 26 3/4” (679mm) if installing the mirror vertically. Note: The distance between the holes in the mounting hangers (B) on the back of the mirror (A) is 28 3/4” (730mm) if installing the mirror horizontally. B B A B 2.
INSTALLATION INSTRUCTIONS 2 1 3 1 3. There is no need to drill pilot holes for wall anchors (AA). Screw anchors (AA) flush into the wall. Then, insert screws (BB) into anchors (AA), leaving approximately 1/4 in. protruding out from the wall. AA 2 BB AA Hardware Used BB AA Anchor x2 BB Screw x2 AA 4. With the assistance of another adult, lift mirror (A) to the wall and hang mounting hangers (B) on screws (BB).
CARE AND MAINTENANCE • Dust the frame regularly with a soft, non-lint producing cloth or household dusting product. • You can clean the mirror frame with a non-abrasive household cleaner. Make sure to dry the wood immediately with a soft cloth or towel. • The glass can be cleaned using standard household glass cleaning agents. • Tips for using touch-up pen (CC): For scratches, stroke in direction of scratch; for worn areas, stroke in direction of wood grain. Rub excess colorant promptly with a soft cloth.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.