Installation Guide
9
INSTALLATION INSTRUCTIONS
11. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in or out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
11
2
2
2
2
2
2
a
3
a
1
b
1
1
c
1
c
3
12. Apply adhesive (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess adhesive before allowing
to dry.
12
1
A
B
2
2
C
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
if not already done at step 8. Per the
manufacturers’ instructions to complete the
installation.