TM Roveland Bathroom Vanity 72-IN Vanity Base and Top ( 72-IN W x 22-IN D x 35-IN H) Date Purchased _______________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-571-1044 9 a.m. - 5 p.m., EST, Monday-Friday. www.greentouchhome.
TM MODEL NUMBER DESCRIPTION 2026VA-72-200 2026VA-72-201 2026VA-72-202 2026VA-72-205 2026VA-72-242 72" Gray Painted Vanity Base & Sink 72" White Painted Vanity Base & Sink 72" Mahogany Vanity Base & Sink 72" Black Oak Vanity Base & Sink 72" Light Gray Finish Vanity Base & Sink 2500VT-72-900 2500VT-72-901 2500VT-72-904 2500VT-72-905 2500VT-72-906 72" Carrara Marble Top with Backsplash 72" White Quartz Top with Backsplash 72" Black Granite Top with Backsplash 72" Terrazzo Top with Backsplash 72" Dark Gray
PACKAGE CONTENTS C PART DESCRIPTION B Vanity Top 1 C Backsplash 1 D Sink 2 E Left Door (preassembled to Vanity (A)) 2 F Right Door (preassembled to Vanity (A)) 2 G Shelf 2 A B QUANTITY 1 D A E G F HARDWARE CONTENTS AA BB CC DD EE FF Bolt Qty. 8 Sink Bracket Qty. 8 Nut Qty. 8 Lock Washer Qty. 8 Wrench Qty. 1 Touch-up Pen Qty. 1 GG Shelf Pin Qty.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Installation Time: 45 minutes (24 hours for adhesive to dry). Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, adhesive, power drill with drill bit, measuring tape, level INSTALLATION INSTRUCTIONS 1.
INSTALLATION INSTRUCTIONS 3. Screw bolts (AA) into the threaded holes of stone top (B) 3 AA D CK BA CK BA B Hardware Used AA Bolt D x8 CK BA 4. Lower the sink brackets (BB) over the bolts (AA) and allow to rest on the sink lip. Adjust location of bracket to firmly grasp sink lip. Lower lock washers (DD) over bolts (AA) and secure with nuts (CC). Hand tighten nuts (CC) with included wrench (EE). DO NOT OVER TIGHTEN! Repeat for the remaining sink.
INSTALLATION INSTRUCTIONS 5. Clean area where the vanity (A) will be permanently located prior to beginning installation, ensuring the vanity (A) will not interfere with any water supply and drain lines once mounted. Locate wall studs and mark locations. With the help of another adult, place completed Vanity Cabinet Assembly to its final location. Adjust the height of the Vanity Cabinet (A) by twisting the adjustable leveler foot pins on the bottom of each leg.
INSTALLATION INSTRUCTIONS 7. To install the top with sink to the vanity (A). Apply silicone adhesive to the top edge of the wood cabinet. With the help of another adult, gently lower the stone top with assembled sink onto the cabinet. Make sure the stone top is flush with the back side of the wood cabinet and the stone overhang is equal on both sides over the wood cabinet left and right side walls. Remove any excess adhesive before allowing to dry.
INSTALLATION INSTRUCTIONS 9. If you need to adjust the doors, do so in the following manner. To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws. To adjust door left or right, turn screws (b) on both hinges, in or out. To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws. 9 2 2 2 2 2 2 a 1 a 3 1 1 10. To remove drawers preassembled in vanity (A).
INSTALLATION INSTRUCTIONS 11. To reinstall drawers into vanity (A). Please fully extend metal glide tracks, gently lower and slide drawer box into rear glide catch, then, lower drawer box down to completely rest on extended glides, push plastic levers to lock the drawer box in place. Repeat for remaining drawers. Note: To Adjust the drawer box height. Please spin the adjustment wheel to the left to raise the drawer box or spin the adjustment wheel to the right to lower the drawer box.
CARE AND MAINTENANCE • • • • Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product. You can clean the vanity with a gentle, non-abrasive household cleaner. Make sure to dry the wood immediately with a soft cloth or towel. The stone top can be cleaned using standard marble cleaning agents available at your local supplier. • Tips for using touch-up pen (FF): For scratches, stroke in direction of scratch. Rub off excess colorant promptly with a soft cloth.
REPLACEMENT PARTS FOR 2026VA-72-200 For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.
REPLACEMENT PARTS FOR 2026VA-72-201 For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.
REPLACEMENT PARTS FOR 2026VA-72-202 For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.
REPLACEMENT PARTS FOR 2026VA-72-205 For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.
REPLACEMENT PARTS FOR 2026VA-72-242 For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.
