ITEM #1341885 LED PENDANT MODEL #CPSL6BNK Français p. 10 Español p. 19 ATTACH YOUR RECEIPT HERE For Damp Location Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
TABLE OF CONTENTS Package Contents ............................................................................................................... 2 Hardware Contents .......................................................................................................................... 3 Safety Information ............................................................................................................... 3 Preparation ...........................................................................
HARDWARE CONTENTS (shown actual size) BB AA Wire Connector Machine Screw Qty. 3 Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. Failure to do so could lead to fire, electrical shock or other injuries that could be hazardous or even fatal.
SAFETY INFORMATION • To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this light fixture are designed to accept only one 12-gauge house wire and two lead wires from the light fixture. If your house wire is larger than 12-gauge or there is more than one house wire to connect to the corresponding fixture lead wires, consult an electrician for the proper size wire connectors to use.
ASSEMBLY INSTRUCTIONS 1 1. Turn off circuit breakers and wall switch to the fixture supply line leads. DANGER: Failure to disconnect power supply prior to installation may result in serious injury or death. 2. Remove existing fixture and disconnect all electrical wiring. 2 3. Remove mounting plate (B) from fixture (A) by removing mounting plate screws (C) from the fixture (A). 3 ON ON OFF OFF B Save mounting plate screws (C) for later use.
ASSEMBLY INSTRUCTIONS 4. Attach mounting plate (B) to outlet box (not included) using the existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult with a licensed electrician before proceeding. Tighten machine screws (BB) completely to secure mounting strap (B). 4 Outlet Box B CAUTION: The fixture must be mounted to an outlet box that is supported by the building structure.
ASSEMBLY INSTRUCTIONS 7. Connect BARE/GREEN ground wire from outlet box to BARE wire from fixture (A) using wire connector (AA). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA). NOTE: Screw wire connectors (AA) on in a clockwise direction.
ASSEMBLY INSTRUCTIONS 9. Carefully arrange excess wiring and wire connectors (AA) within canopy at top of fixture (A). Align holes in edge of canopy with holes at ends of mounting plate (B). Re-insert the two mounting plate screws (C) previously removed on Step 3, page 5. Tighten mounting plate screws (C) securely using a screwdriver. 9 Outlet Box B C C A 10 10. Screw one shade (D) onto one of the sockets of fixture (A). A Repeat for remaining shades. NOTE: Do not overtighten shades (D). D 11.
CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Light does not come on initially or no longer comes on. 1. Power is OFF. 2. Faulty connection. 3. LED component is not working properly. 1. Make sure power supply is ON. 2.
