User Manual

Page 6 of 12
P/N 595284-01 Rev A 9/13
Personnel assigned to a particular vehicle should log in (SWIPE IN) to the QUEUE
Interface on that vehicle as part of their daily routine. Personnel should SWIPE OUT
or LOG OUT MANUALLY if they know they will NOT be on the vehicle if it is called
into service.
TO SWIPE IN
Be sure the Unit is ON
Place a SCOTT RFID Badge, Tag, or Button on (or no more than 1/2” above)
SWIPE area.
The unit will beep three (3) times and the name will appear in the DISPLAY.
When the unit has reached its capacity of twelve (12) users, the unit will
play a different sound to indicate that the individual has not been accepted.
TO SWIPE OUT
Be sure the Unit is ON
Press and hold the SWIPE OUT (S/O) button
Place an RFID Badge, Tag, or Button on (or no more than 1/2” above))
SWIPE Area.
An AMBER LED next to the S/O button will go on and the unit will play a
two-note descending tone.
Release the S/O button.
TO LOG OUT MANUALLY
Use the DOWN ARROW to scroll to your name. When your name appears in
the top line of the Display, press DEL and hold until the unit plays a series
of descending tones.
FAILED SCAN
If a SWIPE in OR out is unsuccessful, there will be NO FLASH and NO
SOUND.
USE WITH THE BASE STATION
1. Turn on the Base Station computer with the SCOTT IMPERIUM Accountability
Software with the PCMCIA Communications Card or USB GATEWAY Commu-
nications Interface installed. Refer to the Base Station Instructions.
2. When the QUEUE Interface Accessory establishes communication with the Base
Station, the RANGE Light on the QUEUE Interface will glow solid GREEN.
3. The QUEUE Interface will appear on the Base Station Display Screen in the
STAGING 1 SIDEBAR as a Resource with an ID number as programmed on the
QUEUE Interface (see the PROGRAMMING THE QUEUE Interface Accessory
ID section of this instruction). The QUEUE Interface will appear as a Team Icon
with a WHITE Circle surrounding it. If the QUEUE Interface goes out of range,
the Circle will change to ORANGE.
The number in the Team Icon indicates the total number logged into the QUEUE
Interface PLUS ONE for the QUEUE Interface itself.
ENTRY FOR
QUEUE Interface
USE OF THE ACCOUNTABILITY SYSTEM QUEUE INTERFACE
CONTINUED...
NOTE
AFTER THE QUEUE INTERFACE HAS
COMMUNICATED WITH THE BASE STATION,
LOGGING OUT OR SWIPING OUT ON THE
QUEUE INTERFACE WILL NOT REMOVE
THE INDIVIDUAL FROM THE ACTIVE BASE
STATION DISPLAY.