BMX SCOTT 2014 BIKE OWNER’S MANUAL SCOTT SPORTS SA | 17 RTE DU CROCHET | 1762 GIVISIEZ | SWITZERLAND © 2013 SCOTT SPORTS SA, ALL RIGHTS RESERVED | SCOTT-SPORTS.COM DISTRIBUTION: SSG (EUROPE) DISTRIBUTION CENTER SA P.E.D ZONE C1, RUE DU KIELL 60 | 6790 AUBANGE | BELGIUM | V3.
CONTENT Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 004 Bicycle Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 005 Saddle height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 006 Chain tension . . . . . . . . . . . . . . .
CONGRATULATIONS BICYCLE SAFETY Congratulations on your purchase of a new SCOTT bicycle! We are confident that the bicycle will exceed your expectations for value, performance, and ride quality. Each frame set and component has been custom specified and designed to enhance your riding experience. Whether you are a beginning cyclist, or a seasoned pro, SCOTT bicycles will provide endless hours of two-wheeled fun. 1.
SADDLE HEIGHT CHAIN TENSION Comfortable riding not only depends on the position of the saddle, but also on its height. You can accurately adjust the height of the saddle to the length of your legs when you proceed as follows: In case the chain needs to be tensioned again, please release on both sides nut A and pull the rear wheel straight backward until the tension is ok. 1. Straddle the saddle. Place the ball of your foot on the pedal nearest to the ground. Make sure the cranks are vertical.
BRAKES V-Brakes Brake adjustment general 2. Pass the inner cable through the inner cable lead, and after setting so that the total of the clearances between the left and right shoes and the rim is 2 mm tighten the cable fixing bolt. 1. Your SCOTT bike is fitted with a reliable and well-functioning braking system, provided the brakes are correctly adjusted. Check by measuring the distance between the brake shoes and the rim: it should be 1.5 to 2 mm.
Replacement of the brake pads/cartridge shoe Remove the security pin on the brake shoe. 1. Remove the brake pad by sliding it along the groove of the brake shoe bar. TIRES AND RIMS 2. Make sure to use the correct brake pad and brake shoe for each side. Those for the left side are different from those for the right side. Tires should always be inflated within the manufacture’s recommendations. 3.
Wheels WARNING! Bicycle wheels are designed to be removable for easier transportation and for repair of a tire puncture. In most cases, the wheel axles are inserted into slots, called “dropouts” in the fork and frame, but some suspension mountain bikes use what is called a “through axle” wheel mounting system. Do not remove or disable the secondary retention device. As its name implies, it serves as a back-up for a critical adjustment.
Assignment of brake levers to front and rear brake In general SCOTT bikes are delivered and preassembled with the right lever matching the rear brake and the left lever matching the front brake. Due to national laws this could have been changed by your SCOTT dealer to fulfil the national laws. Please ask your dealer to explain to you the assignment of the brakes and brake levers when handing over the bike.
BICYCLE CARE - Rims and tension of spokes. If necessary true them. - Air pressure of the tires according to the recommendation of the producer. - Overall condition of the tires - Light systems and bell - Handlebar grips to be fixed to the handlebar - All parts of the rear suspension system including mounting bolts Doing so keeps the value of the bike and helps to prevent from corrosion or other damages: - The front suspension fork on perfect function and play in the bushings.
Mounting bolt Cable fixing bolt Pulley screws Clamp Cable fixing bolt Clamp mounting bolt Clamp mounting bolt Clamp mounting bolt Freewheel body Cassette fixing nut Square type Spline type Chainring screws Front Derailleur Rapidfire lever STI Brake lever Freewheel hub Crankset BB-Cartridge Pedals Stem Seatpost-seatclamp V-Brake Caliper Disc brake Disc mounting bolts 18 Mounting bolts M5 M6 M4 M5 M6 Frame mounting bolts Cable fixing bolt Brake pad bolts Magura Shimano Formula Hayes Magura Shimano F
WARRANTY WARRANTY SCOTT bikes are made using the most innovative production and quality methods. They are equipped with best components of well known parts suppliers. Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for two years for defects in material and/or workmanship in case of purchase of completely assembled bikes.
PARTS OF WEAR AND TEAR Parts of wear and tear are excluded from any warranty. Chain Due to its use the chain is subject to wear and tear. This depends on maintenance and conditions of use of the bike (amount of kilometers, rain, dirt, salt, etc.). Cleaning and greasing will help to prolong its life but you will have to replace the chain when reaching the wear limit. Sprockets, chainrings and pulleys Due to its use sprockets, chainrings and pulleys are subject to wear and tear.
Model Model Year Year Size Size Frame Frame Date of purchase Date of purchase Annual service to be done Annual service to be done - Check of shock mounts incl. lubricating the bushings - Check of shock mounts incl. lubricating the bushings - Check of swingarm pivot incl. axle and mounts - Check of swingarm pivot incl.
Model Model Year Year Size Size Frame Frame Date of purchase Date of purchase Annual service to be done Annual service to be done - Check of shock mounts incl. lubricating the bushings - Check of shock mounts incl. lubricating the bushings - Check of swingarm pivot incl. axle and mounts - Check of swingarm pivot incl.
SCOTT SERVICE PLAN Model Year Size Frame Date of purchase Check of shock mounts incl. lubricating the bushings - Check of swingarm pivot incl.