Operation Manual

ENGLISHENGLISH
TIGHTENING TORQUES FOR SCOTT BIKES
PART MOUNTING BOLT MAX. TORQUE
Rear Derailleur ‑ Mounting bolt
‑ Cable fixing bolt
‑ Pulley screws
7.8‑9.8 Nm
3.9‑5.9 Nm
2.9‑3.9 Nm
Front Derailleur ‑ Clamp
‑ Cable fixing bolt
4.9‑6.8 Nm
4.9‑6.8 Nm
Rapidfire lever ‑ Clamp mounting bolt 4.9‑6.8 Nm
STI ‑ Clamp mounting bolt 4.9‑6.8 Nm
Brake lever ‑ Clamp mounting bolt 4.9‑6.8 Nm
Freewheel hub ‑ Freewheel body
‑ Cassette fixing nut
35‑49 Nm
30‑49 Nm
Crankset ‑ Square type
‑ Spline type
‑ Chainring screws
35‑45 Nm
35‑50 Nm
7.8‑10.7 Nm
BB‑Cartridge 50‑70 Nm
Pedals 40 Nm
Stem Mounting bolts
‑ M5
‑ M6
5.6‑7.8 Nm
9.8‑13.7 Nm
Seatpost‑seatclamp ‑ M4
‑ M5
‑ M6
2.8‑3.9 Nm
5.6‑7.8 Nm
9.8‑13.7 Nm
V‑Brake ‑ Frame mounting bolts
‑ Cable fixing bolt
‑ Brake pad bolts
5‑6.8 Nm
5.8‑7.8 Nm
5‑6.8 Nm
Caliper Disc brake ‑ Magura
‑ Shimano
‑ Formula
‑ Hayes
6 Nm
6‑8 Nm
9 Nm
12 Nm
Disc mounting bolts ‑ Magura
‑ Shimano
‑ Formula
‑ Hayes
4 Nm
2‑4 Nm
6.2 Nm
5 Nm
TROUBLESHOOTING
TROUBLE REASON SOLUTION
Fork Shakes Headset Loose Tighten and Lock
Chain Pops Out
‑ Derailleurs Not Adjusted
‑ Chainwheel Bent
‑ Adjust According to Manual
‑ Fix or Change
Bearings Squeak or Crack ‑ Bottom Bracket
‑ Pedals Need Grease
‑ Hubs Need Grease
‑ Replacement
‑ Dismount, Clean, Grease
‑ Dismount, Clean, Grease
Bearings Are Loose ‑ Bottom Bracket
‑ Pedals
‑ Hubs
‑ Replacement
‑ Tighten and Lock
‑ Tighten and Lock
Handlebar Cracks, Shakes Stem Or Handlebar Bolts Are
Loose or Turn
Tighten All Bolts and Nuts
Seat Post Turns or Slides
‑ Quick Release is Loose
‑ Seat Post Diameter Too Thin
‑ Retighten and Lock
‑ Check Diameter
Front Derailleur Rattles ‑ Bottom Bracket Loose
‑ Not Adjusted
‑ Chainwheel Bent
‑ Tighten Bottom Bracket
‑ Adjust
‑ Fix or Change
Suspension Fork is Loose Contact Your Local Dealer
Rear Suspension is Loose Contact Your Local Dealer
17 |
BIKE USER MANUAL | BMXBMX | BIKE USER MANUAL
| 16