User manual

28
Operating Instructions
■ Setting of “V-Chip”
Some programs and movies include signals that classify the content of the
 program(dialog,language,sex,violence).The“V-Chip”controlfeatureinthis
 detectsthesignalsandblockstheprogramsaccordingtoyourselections.To
use this feature, perform the following setup.
Adjustment only for TV, DTV, AV, S-VIDEO input signal.
󱌮 Press
Menu button, and then press
 or buttonuntilthe“Setup”
menu appears.
󱌰 Press
 or button to highlight
the item.
󱌲 Press
Enter button to confirm.
 The“V-Chip”menuincludesthe“V-ChipEnable”,“BlockMPAARating”,“Block
 TVRating”,“BlockMPAAUnrated”,“BlockTVNoneRating”and“Change
 Password”functions.YoucanusethesefunctionsafterenteringthecorrectPIN
code.
Entering the PIN code
󱛐BlockingResetstatus:
Set your 4-digit code by pressing the Number buttons (0~9), and then press
Enter.
󱛐When the PIN code is already stored:
Press the Number buttons (0~9) to enter the 4-digit PIN code used for
  blockingchannels,andthenpress
Enter.
 Note: Theinitialpasswordforthesystemis“0000”.
If you had forgotten the password, please contact with service centre.
If the input is invalid, a message will pop up as below;