MODEL NO.: SBX 10 RF 2.
PRECAUTIONS Follow the instructions below to ensure the product is used safely and correctly. PLACEMENT . Do not use the unit in places which are extremely hot, cold, dusty, or humid. . Place the unit on a flat, even surface. . Do not restrict the airflow around the unit by placing it in a place with poor ventilation, by covering it with a cloth, or by placing it on a carpet. . Do not place the unit close to heat sources. . Use the apparatus only in moderate climates. .
CONTENT PRECAUTIONS CONTENT BOX CONTENT LOCATION OF CONTROLS POWER SUPPLY BASIC OPERATION MAINTENANCE TROUBLESHOOTING GUIDE TECHNICAL SPECIFICATIONS 1. Unit 2. Pin for pairing 1 2 2 2 2 2 3 3 3 BOX CONTENTS 3. Instruction manual LOCATION OF CONTROLS RF 2.4 GHz wireless subwoofer 1. Bass reflex tube 2. Standby/Power LEDs (2x) 3. Speaker 4. Bass volume control 5. PAIR button 6. Crossover frequency switch 7. PHASE switch 8. POWER ON/OFF switch 9.
Bass volume control Rotate the bass volume dial to adjust the volume. Crossover frequency Slide the switch to select the crossover frequency: 80, 120 or 160 Hz for different bass effect. This setting is depending on the music content. Phase adjustment As different rooms have different influences on the bass, the phase switch is used to compensate the room acoustic effect. Place the subwoofer as required, listen to strong bass music and then set the PHASE switch to 0° or 180°.
