Instruction manual

GB 2
AUDIO CONTROL
LISTENING TO THE RADIO
2 . Set the function switch to RADIO.
FUNCTION
4. TunetothedesiredradiostationbyusingtheTUNING
knob.Thefrequencyisdisplayed.
5. AdjustthevolumelevelusingtheVOLUMEbutton.
1 . Press the STANDBY button to turn on the unit.
TUNING
RADIO
VOLUME
MIN. MAX.
3 . Select the FM ST. (FM stereo) or FM MONO mode.
MODE
FM ST. FM MONO
Extend the antenna and adjust the angle to get a better reception.
FM
NOTE: 1. TheFMstereoLEDindicatorlightsiftheunitreceivesanFMstereobroadcastandtheMODEswitch
is set to "FM STEREO".
 2. WhentoomuchnoiseisheardduringFMSTEREOreception,settheMODEswitchtoFMMONO.
AFTER LISTENING
Press the STANDBY button to switch the unit off.
1. Press the standby button to switch the power on/off.
2. Press the STOP / CLEAR / CD / USB button repeatedly to
select CD or USB mode.
STOP / CLEAR /
CD/USB
The clock is displayed on the LCD display in standby mode.
1. Press the PROGRAM / CLOCK-ADJ. button,
2. Press the or button to select 12 hour or 24 hour display.
3.PressthePROGRAM/CLOCK-ADJ.button,Thehourdigitwillash.
4.Presstheorbuttontoadjustthehourdigit.
5.PressthePROGRAM/CLOCK-ADJ.buttonagain,Theminutedigitwillash.
6.Presstheorbuttontoadjusttheminutedigit.
7.PressthePROGRAM/CLOCK-ADJ.buttonagain,Thecorrecttimeisshownonthedisplay.
CLOCK ADJUSTMENT
PROGRAM/CLOCK-ADJ.
LCD display