SDS

TOMCAT REPELLENTS RODENT
REPELLENT CONTINUOUS SPRAY
Page:4/10
Version
:
1
.
0
Date of issue
/
Date of revision
:
10/09/2017
Date of previous issue
:
00/00/0000
Environmental precautions :
Avoid dispersal of spilled material and runoff and contact with soil,
waterways, drains and sewers. Inform the relevant authorities if the
product has caused environmental pollution (sewers, waterways, soil
or air).
Methods and materials for containment and cleaning up
Spill :
Stop leak if without risk. Move containers from spill area. Approach
release from upwind. Prevent entry into sewers, water courses,
basements or confined areas. Wash spillages into an effluent treatment
plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or
diatomaceous earth and place in container for disposal according to
local regulations (see Section 13). Dispose of via a licensed waste
disposal contractor. Contaminated absorbent material may pose the
same hazard as the spilled product. Note: see Section 1 for emergency
contact information and Section 13 for waste disposal.
Section 7. Handling and storage
Precautions for safe handling
Protective measures :
Put on appropriate personal protective equipment (see Section 8). Do
not ingest. Avoid contact with eyes, skin and clothing. Avoid
breathing vapor or mist. Keep in the original container or an approved
alternative made from a compatible material, kept tightly closed when
not in use. Empty containers retain product residue and can be
hazardous. Do not reuse container.
Advice on general occupational
hygiene
:
Eating, drinking and smoking should be prohibited in areas where this
material is handled, stored and processed. Workers should wash hands
and face before eating, drinking and smoking. Remove contaminated
clothing and protective equipment before entering eating areas. See
also Section 8 for additional information on hygiene measures.
Conditions for safe storage,
including any incompatibilities
:
Store in accordance with local regulations. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area,
away from incompatible materials (see Section 10) and food and
drink. Protect from sunlight. Keep container tightly closed and sealed
until ready for use. Containers that have been opened must be
carefully resealed and kept upright to prevent leakage. Do not store in
unlabeled containers. Use appropriate containment to avoid
environmental contamination.
Section 8. Exposure controls/personal protection
Occupational exposure limits
None.
Appropriate engineering controls :
Good general ventilation should be sufficient to control worker
exposure to airborne contaminants.
Environmental exposure controls :
Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of