SDS

TOMCAT REPELLENTS RODENT
REPELLENT CONTINUOUS SPRAY
Page:5/10
Version
:
1
.
0
Date of issue
/
Date of revision
:
10/09/2017
Date of previous issue
:
00/00/0000
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures :
Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the end
of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Wash contaminated
clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection :
Safety eyewear complying with an approved standard should be used
when a risk assessment indicates this is necessary to avoid exposure to
liquid splashes, mists, gases or dusts. If contact is possible, the
following protection should be worn, unless the assessment indicates a
higher degree of protection: safety glasses with side-shields.
Skin protection
Hand protection :
Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical products
if a risk assessment indicates this is necessary. Considering the
parameters specified by the glove manufacturer, check during use that
the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be
different for different glove manufacturers. In the case of mixtures,
consisting of several substances, the protection time of the gloves
cannot be accurately estimated.
Body protection :
Personal protective equipment for the body should be selected based
on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Other skin protection :
Appropriate footwear and any additional skin protection measures
should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this
product.
Respiratory protection :
Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or anticipated
exposure levels, the hazards of the product and the safe working limits
of the selected respirator.
Section 9. Physical and chemical properties
Appearance
Physical state :
liquid [COLORLESS TO LIGHT YELLOW LIQUID]
Color :
Colorless to light yellow.
Odor :
Peppermint-like. Cinnamon
Odor threshold :
Not available.
pH :
7.8
Melting point :
Not available.