Instructions / Assembly

10056091
8-17-2017 6:23 PM Steve Iacona / Steve IaconaSaved at Nonefrom iMac-17-1a by Printed At
Approvals
Client
Built At
Output At
Scale
Bleed
Trim
Viewing
Live
Vendor
Contact
Scotts
100%
100%
1” = 1”
8” h x 31.625” w 7.75” h x 31.375” w
7.75” h x 31.375” w 7.75” h x 31.375” w
None
[e-mail]
Job info
8x8 4PANEL 8 PGfold_INSIDE
Notes/Special Instructions
Art Director
Copy Editor
PM
None
None
None
Fonts
Hellix (Regular, Heavy)
Inks
Cyan, Magenta, Yellow, Black,
PMS 3288 C, PMS Cool Gray 7 C
Images
Sprinkler_Setup_Page1_3288_r1.ai (60%,
70%), Sprinkler_Kit_Pieces_20170724_COL-
OR_3288_r1.ai (50%, -50%, 50%, -50%),
Sprayer_Kit_Pieces_20170715_3288_r1.ai
(50%, 50%, -50%), Sprinkler_Base_
Sideview_3288.ai (50%), Sprayer_Kit_Piec-
es_20170715_GREY_r1.ai (25%, 25%),
Sprinkler_Kit_Pieces_20170724_GRAY_r1.ai
(25%)
Fonts & Images
Go to www.mygro.com/sprinkler
Lay out Tubing—put it in the
sun for a few minutes to help
soften it up.
Identify the spigot, timer, or
hose you want to connect to.
Gather additional tools: scissors.
Plan Your Setup
Watch Quick Start Video
Component List
In the Pack
Loose in
the pack
Garden Sprinkler Head x 1 Garden Sprinkler Base x 1
End Plug x 1
Water Flow Reducer
& Filter x 1
Tubing x 50 ft
(15 m)
90-Degree
Elbow-Joint × 3
Tubing Pipe Guide x 3
Riser For Garden Sprinkler x 1
Tubing Pipe Guide x 2
Quick Connect
Accessory Adapter × 2
5 ft Quick Connect Leader Hose x 1
( 1.5 m)
Bag 1
Bag 2
Bag 3
Bag 4
Quick Connect
Spigot Adapter × 1
Quick Connect
Male Hose Connector × 1
Quick Connect
Female Hose Connector × 1
Step 1
Connect to Water Source
Connect your Garden Sprinkler Kit
to a water source using this
diagram as a guide.
Option A If you are planning
to use a timer to control your
system, attach it first to your
spigot or hose, and then attach
the Quick Connect Spigot
Adapter to your timer.
Option B If you plan to use your
existing hose, attach the Quick
Connect Male and Female Hose
Connectors to either end and
attach it to the spigot.
Quick Connect
Spigot Adapter
Quick Connect
Male Hose
Connector
Timer
(Not Included)
Spigot
Quick Connect
Female Hose
Connector
Simply pull back
the coupling to
slide on Tubing.
Water Flow
Reducer & Filter
Tubing
5ft Quick Connect
Leader Hose
Your Existing
Garden Hose
Components needed
Bag 1
Loose in
the pack
Option A
Option B
Step 2
Lay Out and Stake Tubing
Keeping in mind where you will need to
place the Garden Sprinkler to reach your
plants, begin laying out the Tubing.
Add 90-Degree Elbow Joints to go
around corners as needed.
Lay out your Tubing using the
included Elbows and Pipe Guides. You
can reference the example arrangement
on this page to see how the various
components can be used to build your
system.
Tip: Lay your Tubing out in the sun for
a few minutes to soften it up before
assembling.
Tubing
To Water
Source
90-Degree
Elbow Joint
Components needed
Bag 2
Loose in
the pack
Sprinkler Head
Oscillate
Adjustable spray
width from
2 up to 20 ft.
Total coverage area from
10 ft up to 950 ft
Adjustable spray
length from
4 up to 40 ft.
T:31.375”
T:7.75”
B:31.625”
B:8”
F:7.875”
FS:7.75”
F:7.875”
FS:7.625”
F:7.875”
FS:7.625”
F:7.75”
1005609_T51151_Gro Garden Sprinkler Kit Quick Start Guide_INSIDE rev_8.16_R1.indd 1 8/17/17 6:23 PM