Replacement Part List

PRODUCT SPECIFICATIONS

Model: TC70105S

Power supply voltage:

120V-60HZ

Working width:

7-IN or 11-IN

Tine Speed:

350 RPM

Working depth max:

8-IN

Power Consumption:

10.5 Amp

No.

Description

No.

Description

Upper handle section

Wheel hub cap

Bail wire

Wheel frame lock pin

Switch box and power cable assembly

Motor housing

Cable clip

Protective shield

Cord retainer

Tine assembly, D

PAGE 1
PRODUCT SPECIFICATIONS Model: TC70105S Power supply voltage: Tine Speed: Power Consumption: 120V-60HZ 350 RPM 10.5 Amp Working width: Working depth max: 1 No. Description No.
PAGE 2
6 Wing nut 16 Tine assembly, C 7 J-bolt M6 17 Tine assembly, B 8 Center handle section 18 Tine assembly, A 9 Lower handle section - II 19 Tine lock pin 10 Lower handle section - I 20 Wheel 4 Model TC70105S ASSEMBLY This product must be assembled correctly before use. 1. Remove the screws (M5 X 12) and washers from 4. Slide the cord retainer onto the center handle each end of the wheel frame axle. Assemble the section. (Fig. 2-3) wheels onto the axle, then install washers and 5.