Installation guide

Europe › The Americas › Asia › www.scottygroup.com Europe › The Americas › Asia › www.scottygroup.com
Obtain an IP address, subnet mask, and default gateway address from your
network
provider or use DHCP to obtain an address automatically.
• Press MENU
• Press 2 Communications
• Press 2 Network
• Manual Address:
Select TYPE Static using the arrow keys
IP Address Enter using number keys and “*” key to represent a “.”
Subnet Mask Enter the subnet mask e.g. 255.255.255.0
Gateway Enter the address of your router or firewall
Or
4. Automatic Address
Select TYPE DHCP using the arrow keys.
Press ENTER
Now select TYPE Static to prevent IP address changes from making your
eyesite 550 unit inaccessible.
5. Press ENTER 2x to save your address.
6. If you are not working from behind a firewall your IP configuration is
complete.
Step 6: Configure an IP Address
7 8
Step 7: Configure your firewall
Internet
Router
Firewall
Ethernet Switch
eyesite 550
Router/Firewall Configuration
Public IP Address Type: Static
Public IP Address: 62.173.119.212
Public Subnet Mask: 255.255.255.252
Private IP address: 192.168.1.1
Private Subnet Mask: 255.255.255.0
Advanced Settings/Firewall Configuration
DMZ Host address: N/A
Forwarding rule
Incoming data on port: 2099
To IP Address: 192.168.1.2
UDP Port No: 2099
Type: UDP
Comments
Port forwarding provides enhanced security
Multiple forwarding rules possible if a different
UDP port is used on each eyesite 550
How the remote unit places a call
Dial 62.173.119.212:2099 (: = UDP Port)
Eyesite 550 configuration
IP Address Type: Static
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
UDP Port: Default (2099)
Comments
Using Packet Buddy Protocol only
If you are connecting from behind a firewall this port forwarding example may
help you to choose the best settings.
All in one
Router/Firewall/Switch