User manual

4
Unique technology
eyesite 550 remote video systems offer a range of unique features that improve the
user and administrator experience
Pre-Event Recording
• Retrieve images before the event was triggered. The eyesite 550 stores these
images for you to download.
Auto-Dial on Alarm
• The eyesite 550 can be linked to an alarm panel, sensors, or motion detectors.
During an event the eyesite 550 can automatically connect to a remote
monitoring facility.
6 Independent Zones
• Attach a sensors for each camera, and the eyesite 550 follows activity around
your building without operator intervention.
• Each zone supports 2 way audio. Access can be controlled to a number of doors.
• Each zone supports a controlled output. Unlock a door, set off an alarm, turn on
a light.
• Zones connect using standard category 5 structured cabling- no need to run
dedicated cabling to the zone- just use your existing system.
Web server for Remote Management
• Configure and monitor the status of the eyesite 550 using the built in web server
either locally or remotely.
• Prevent unauthorised users by using the PIN number feature.
Packet Buddy protocol
• Constantly adapts and adjusts to the available bandwidth over the Internet
• Reorders, corrects, and recovers from errors in transmission.
Simplified installation
• The eyesite 550 supports DHCP and PPPoE protocols, allowing automatic
configuration of the core IP information.
• The Packet Buddy Protocol uses a single UDP port to make a video call instead
of the 6+ ports used by an H323 device. This allows outgoing calls to be made
with little or no firewall configuration.