User manual

7
Introduction & Getting Started
Connecting to the Network or Phone Line.
To connect the Phone Line cable
1. Connect one end of the PSTN line cable to the RJ-11 socket labeled ‘Phone
Line’.
2. Connect the other end into the phone line jack on the wall.
To connect the network cable:
1. Connect one end of the network cable into the socket labeled Ethernet at the
rear of the eyesite 550.
2. Connect the other end into your RJ-45 network jack..
Connecting the Power Supply
To connect the power supply:
1. Connect the power supply adapter to the circular power jack labeled
12 VDC, 3A at the rear of your eyesite 550.
2. Connect the AC power cord to the other end of the power supply adapter and
to your wall outlet.
The status light on the front of the eyesite 550 turns from flashing green to
solid green when the system is ready for use.