User manual

10
Set Up Keys
Use the following keys to set up the eyesite 550:
• MENU- Displays the Setup Menu.
• CLEAR- Deletes everything in a highlighted field within a menu.
• ENTER- Saves a selection or entry
• EXIT - Cancels a selection or entry and exits out of the current menu to the
previous menu.
Installing Batteries
Batteries are provided and must be installed before using the remote control. When
the effective range of your remote control becomes noticeably shorter, replace the
batteries with four high quality, alkaline, size AAA batteries. Under typical use, the
batteries will last for more than one year.
Using the Web Server for remote configuration and management.
The eyesite 550 includes a web server allowing local or remote configuration and
management.
Accessing the eyesite 550 web server locally
To access the web server the eyesite 550 first needs to obtain an IP address.
To obtain a valid IP address:
1. Connect a TV to the video out connector of the eyesite 550.
2. Press the Menu button on the remote control and then select 2 for
Communications and 1 for Network.
3. Press 1 to select the IP address type and either select Static, entering the IP
address, subnet mask, and default gateway supplied by your network
administrator or DHCP to obtain one automatically.
4. Take a note of this IP address.
5. Browse into the eyesite 550 by typing in http://x.x.x.x into your browser as
shown.
6. The following status page will be displayed