User manual

17
Setting up the eyesite 550
Setup Menu Options
All the menus are displayed from the Setup Menu. The Setup Menu options are:
Saving Changes When all changes have been made within a setup menu,
press the ENTER button twice. The message: “Saving
Changes…” is displayed on your screen.
Canceling an action Press the EXIT button.
Phone Book Allows you to enter and edit entries in your Phone Book.
Allows you to set the remote video system to Master or Slave
mode and allows a slave unit to import phone book entries
from a master Phone Book. See “Communications Setup” on
page 20.
Communications Displays the Communications menu which allows you to
access the Network menu for setting the communications
parameters for your Analog and IP network and also set the
H323 settings, Data Speed, Auto Answer, and Auto Dialer
options. See “Communications Setup” on page 20.
Camera Video Displays the Camera Video Setup menu in which you set up
video presets and remote access. See “Setting Camera Video
Presets” on page 67.
Image and Audio Displays the Image and Audio menu in which you set up the
image properties for transmission and enable audio
transmission.
Zones Displays the Zones menu which allows you to configure
inputs, outputs, and responses to events.
Data Ports Displays the Data Port Options menu in which you configure
the data ports for data transfer and PTZ camera control. See
“Using the Data Ports” on page 77.
System Displays the System menu in which you can set the User ID,
the User PIN and Supervisor PIN numbers. See “Changing
the User Options” on page 73.
Information Displays information including the Customer Services
number, the serial number and the software version of your
remote video system. See “The Information Screen” on
page 81.
Diagnostics Displays information about the last call and network
statistics. See “Diagnostic Information” on page 82.