User manual

Setting up the eyesite 550

3. Highlight the Name field using the Up or Down arrow keys. Enter the name of

the contact using the number keys on the key pad which are also labeled with

letters. The name you enter also appears in your Speed Dial directory

• Press a number key to cycle through the letters until your choice is displayed.

• Press the Right arrow key to move one space to the right to enter the next letter.

• Press the Left arrow key to delete the previous character.

4. Highlight Type and select the connect speed of the remote video system.

Select either IP 32K, IP 48K, IP 64K, IP 96K, IP 128K, IP 160K, IP 192K,

IP 256K, IP 320K, IP 384K, Analog or PING. For Asymmetrical mode,

(first number represents maximum receive speed, second number represents

maximum transmit speed) select either

IP 48/32K, IP 64/32K, IP 96/32K, IP 128/32K, IP 160/32K.

Choose PING to test the network path to another device.

5. Highlight the Addr field and enter the IP address or telephone number of the

party you are calling using the number keys. Use the * key (located at the

bottom left of the number pad), or enter a space using the Right arrow key to

represent a period (.) in the IP address. If you enter a number greater than 255

you are notified that an invalid IP address has been entered. The Addr field

stays highlighted until a valid IP address is entered.

6. Press the ENTER button once to save the entry.

7. To enter another number in the Phone Book, press the Right arrow key and

follow steps 3 to 5, above.

8. Press the ENTER button twice to save the information you have entered in the

Phone Book and exit.

Entering a PIN for a Contact

Using a PIN is optional. However, you must enter the PIN if the person you are

calling has this security feature enabled. For information about setting up a PIN, see

“Changing the User Options” on page 73.