User manual

34
Video Presets
The eyesite 550 provides access to a maximum of nine video presets. A preset is a
view setting stored on a PTZ camera (where supported) allowing rapid access to a
particular pan, tilt, and zoom setting. Both presets and sequencing are set in the
Camera Video Setup menu. Video presets can be configured for the cameras
connected to your local eyesite 550. You may also set presets for remote cameras if
you have a supervisor PIN for the remote eyesite 550. In a similar manner, users of a
remote eyesite 550 unit can set and or amend the video presets of a local eyesite 550,
provided you set up a Supervisor PIN and let them have the number. Setting a
Supervisor PIN is covered in chapter 7, Advanced Options.
Setting Video Presets
To set local video presets, press 3 from the Setup Menu. The Camera Video Setup
menu is displayed.
Press the key number 1 to take you into the Preview/Set Preset screen.
Set the Preset mode:
1. Press a number key between 1 and 6 to select the camera to use for preset 1.
The text on the top right of the screen shows the video source you selected for
a few seconds. 1 = Input camera A, 2 = Input camera B and so on.
2. If you have a Pan, Tilt, Zoom camera, use the Zoom In and Zoom Out keys
and the arrow keys to pan, tilt and zoom your camera to the view you wish to
save.
3. When you are satisfied with the view for preset 1, press the SEL key.