User manual

35
Setting up the eyesite 550
4. Press the SEL key again to save the view. Choose a preset number between 1
and 9. The top left of the screen shows the preset view you have chosen (1-9);
the top right of the screen shows the source (1-6).
5. Press EXIT to return to the Camera Video Setup menu
Default Source:
6. Press the key number 2 to provide access to the default source selection.
7. Select the default source using the left and right arrow keys of the remote
control.
8. Press ENTER once to save the default source and to return to the Setup menu.
Viewing Video Presets
To View Local Presets
1. From the Setup Menu, press key number 3. The Camera Video Setup Menu is
displayed.
2. Press the number 1 key to display the preview window.
3. Press a number key 1-6 to select the video source you wish to view. The text
on the top right of the screen shows the video source you select. V1 = Input A,
V2 = Input B, V3 = Input C, V4 = Input D, V5 = Input E, V6 = Input F.
4. Press the Preset key. At the bottom right of the screen you see: “1-9 view”.
5. Choose a number between 1 and 9 to view that preset.
6. To view another preset in the same source repeat step 4 and 5. To choose
another source and view the preset follow steps 3 to 5again.
7. When you have finished viewing presets, press EXIT to return to the Setup
menu.
To view far end presets during a call:
1. While in a call, press the FAR key on the remote control.
2. To select a Video source, press a number on the key pad.
3. To select a preset, press SEL and then press the desired preset number from
the key pad.
4. When you have finished viewing presets, press EXIT to return to the Setup
menu.