User manual

41
Setting up the eyesite 550
2. Enter the zone configuration option that corresponds to the Interface
connector the trigger is attached to (1 - 6).
3. Enter a zone name for the zone by pressing 1 on the remote control.
4. This name should provide a reference to allow an operator at the central
monitoring station to understand where the event is occuring.
Preset configurations.
Access Control
PS-Access is the setting to choose for access control applications where an
input sensor for a call button, output relay to control a lock, and 2 way audio
are desirable.
Passive Infra-Red Sensors
PIR-Drive provides a connection to Passive Infra-Red sensors via a standard
RJ-45 to screw terminal breakout module. PIR-Drive powers the sensor and
monitors the input line for contact opening.