User manual

42
Select the Mode, Audio and Video according to the following table:
Mode The Mode control allows you to select the best settings for
three common interface applications, or allows full parameter
control.
Custom allows full control of all parameters.
PS-Access For SCOTTY’s access control module. This
module breaks out the RJ-45 connection into a convenient
form for access control applications and includes an output
relay to control a lock, audio preamplifier for a microphone,
and audio amplifier for a speaker.
PIR-Drive For connection to Passive Infra-Red sensor via a
standard RJ-45 to screw terminal breakout module. PIR-
Drive powers the sensor and monitors the input line for
contact opening.
PS-Relay For SCOTTY’s external relay module.
Audio In The Audio In menu allows the installer to optimise the audio
to best suit the application.
Disabled Disables incoming audio.
Full Duplex Allows two way conversation in environments
where there is a feedback loop between the microphone and
speaker. (i.e. using the eyesite 550s Acoustic Echo Canceler
is enabled) The audio channel is active only when the zone is
selected
Listen The setting to choose when using an external handset
or headset with no local feedback loop. (i.e. not using the
echo canceler) The audio channel is active only when the
zone is selected
Mixed The audio input for this zone is always enabled and
mixed into the transmitted audio.
Audio Out Disabled Disables outgoing audio.
Enabled Enables outgoing audio to the zone when active.
Video Input Enter a number 1-6. The video input option allows triggers to
be flexibly assigned to video inputs.