User manual

50
of the key pad) or enter a space using the Right arrow key to represent a
period in the IP address.
4. If using a gatekeeper, you may use the Name field instead of the Address
field to enter the name or alias for the user you wish to call.
5. If the person you are calling requires PIN authorization, in the PIN field use
the remote control to enter the PIN.
6. Press the START button to dial your call.
The message “Dialing, User Found, Connecting” is displayed.
7. To end the call, press END on the remote control.
Using Speed Dialing
To make a speed dialed call:
1. Press the START button on the remote control.
The Speed Dial Menu appears showing the names of up to nine contacts
already set up on page 1. (typical screen shown)
Use the Right and Left arrow keys to access additional locations, if more than
9 entries have been made.
2. Press the number key that corresponds to the site you want to call.
The unit automatically dials the call for you.