User manual

70
Setting the Default Preset
If you have more than one camera, choose which of these presets is the Default
Preset.The Default Preset is the view that is displayed at the beginning of each call.
To set the Default Preset:
1. Press the MENU button, then press the number 3 key to display the Camera
Video Setup menu.
2. Press the number 2 key to highlight Default Preset.
3. Use the Right or Left arrow keys and select number between 1 and 9 to set the
Default Preset.
4. Press the ENTER button twice to save your changes and return to the Setup
menu.
Viewing Video Presets
To view near end presets when not in a call:
1. Press the MENU button, then press the number 3 key to display the Camera
Video Setup menu.
2. Press the number 1 key to display Preview window.
3. Press the SEL key on the remote control.
At the bottom right of the screen you see: “1-9 view”.
4. Choose a number between 1 and 9 to view that preset.
5. To view another preset repeat steps 3 and 4.
6. When you have finished viewing presets, the ENTER button twice to return to
the Setup Menu.
To view camera presets during a call:
1. Press the NEAR or FAR button once for control.
2. Press the SEL button.
3. Press a number key between 1 and 9 depending on the video preset you wish
to view.