User manual

71
Connecting Other Equipment
Allowing Remote Control of Video Cameras
The Remote Access feature allows others to remotely control your camera video
sources. Remote Access ON enables remote parties to control your system. Remote
Access OFF prevents remote parties from changing the current video setup.
1. Press the MENU button on the remote control, then press the number 3 key to
display the Camera Video Setup menu.
2. Press the number 3 key to highlight Remote Access.
Press the ENTER button twice to save the selections and to return to the Setup Menu.
Connecting a Video Recorder (VCR)
You can connect a VCR to your remote video system allowing you to locally archive
the outputs from the cameras.
To connect a VCR to your remote video system:
• You need a BNC cable for every camera connected to the eyesite 550.
1. Connect one end of each BNC cable to the appropriate Video In connection
on your VCR and connect the other end to Loop on your eyesite 550.
2. Connect one end of the appropriate audio adaptor cable to Audio In on your
VCR and connect the other end to Interface on your eyesite 550.
3. Chack that the VCR is recording the video and audio correctly.
Additional Information
Information about connecting peripheral equipment can be found in Technical Notes
on the SCOTTY web site. Refer to the Support section, at
http://www.scottygroup.com.
Contact your supplier or SCOTTY for more information on compatible or approved
equipment that can be used with your remote video system.
Remote Access Use the Right or Left arrow keys to select ON or OFF.
Select ON to allow others to remotely control your camera(s).
Select OFF to not allow remote users to control your
camera(s).