User manual

74
Setting up a Supervisor PIN
Like the Security PIN for a User ID, the Supervisor PIN allows you to enter a
confidential Personal Identification Number.
The Supervisor Mode field in the User Options menu allows you to turn the
Supervisor PIN ON or OFF. If the PIN mode is ON, the calling party must enter the
Supervisor PIN to change the video presets from a remote location during the call, or
when using a web browser to remotely configure the eyesite 550.
Note: If you are a calling a unit that has both the Security PIN and Supervisor PIN,
enter the Supervisor PIN when dialing the unit.
Setting up the User Options
To access the User Options menu:
1. Press the MENU button on your remote control, then press the number 7 key
to display the User Options menu.