User manual

75
Advanced Options
2. Use the number keys to select an option in the list.
3. Press the ENTER button twice to save the changes and return to the Setup
Menu.
ID Enter your user ID using the number keys on the key pad.
Press a number repeatedly to scroll through the letters it
represents. When the correct letter is displayed, press the
Right arrow key to move to the next space and be able to
enter another letter.
Press the Left arrow key to delete the last letter.
Press ENTER to save the User ID.
ID Display Allows you to control whether the ID of the remote user is
displayed on your TV screen.
Select ON to display the remote user’s ID for the first 8
seconds of the call.
Select PRIVACY to display the remote user’s ID for the
entire call.
Select OFF to not display the remote user’s ID.
Security PIN Use the number keys on the key pad to enter a four digit PIN.
PIN Mode Select ON to allow a call to be received only if the correct
PIN is entered.
Select OFF to receive a call without having to enter a PIN.
Supervisor PIN Use the number keys to enter a four digit PIN.
Supervisor Mode Select ON or OFF.
If ON is selected the correct PIN must be entered for a call to
be received. The remote user can then change video presets
during the call.
If OFF is selected a PIN is not required in order to receive a
call.
Sleep Mode Select ON or OFF.
If ON is selected the eyesite 550 will go into sleep mode
when unused after approximately 20 minutes, and the screen
will appear blank. The unit will also take around 4 seconds
longer to respond to incoming calls as it wakes from sleep
mode. Press the START key or the MENU key to wake the
unit.
If OFF is selected sleep mode is disabled.
Clock Select this option to enter the clock menu and set the time.