User manual

82
Diagnostic Information
The diagnostics screen shows information about the last call and provides current
network statistics. This information may be useful when evaluating call times or
network conditions.
To display the Last Call Report:
1. Press the MENU button on the remote control, then press the number 9 key to
display the Diagnostics menu.
2. Press the number 1 key to access the Last Call Report.
The following fields are displayed:
3. Press the EXIT button to return to the Diagnostics menu.
Call Time The length of the call.
Speed The speed of information transfer in bytes per second.
Protocol The telecommunications standard for the line you are using
e.g. H.323.
TX Frames,
RX Frames
These fields are useful when the eyesite 550 is used for
videoconferencing. They show the number of frames
transmitted and received.
RX Errors Shows the number of protocol frames received over the
network with an error. The most likely cause is network
traffic.