User`s manual

T-Jet Blazer Series User’s Manual
Version 5.0 Revised September, 2008
84
Shirt Boards
T-Jet Blazer Express
The Blazer EXPRESS includes one Standard Adult and one Large (over-sized) Shirt Board. The
EXPRESS model prints one garment at a time.
T-Jet Blazer PRO
The Blazer PRO model includes three Standard Adult and two Large (over-sized) Shirt Boards, meaning
that on the PRO, although you are not required to, can print either 3 standard-sized prints or 2 over-sized
prints at a time.
Shirt Board Options
You can purchase additional Shirt Boards to accommodate different needs. Each Shirt Board/garment
holder will correspond to a different art layout (or template in FastARTIST). Pictured below are the
various sizes of the Shirt Boards available to order. There are also optional shirt hoops that will aide in
holding the garment in place (call for availability). Refer to Chapter 12 - Printing Other Items for layout
instructions, and additional accessories.
Shirt Board Placement and Care
As covered in Chapter 4 and Chapter 5, each Shirt Board is held in the proper position by metal pins
screwed into the top of the Print Bed that align with the holes in the Shirt Board base. If you have a
Screen Printing background, you may wonder what holds the garment in place. The rubber-like material
on the top of each Shirt Board lets friction hold the garment in place.
WARNING
All Shirt Boards are comprised of a foam rubber pad and a steel base. Although the
base is nearly indestructible, the rest of your printer is not. DO NOT set anything
on top of the Print Bed or Shirt Board. IT IS NOT A STORAGE SHELF and it
WILL WARP.
DO NOT apply any cleaner or glues to the foam rubber pads, they will crumble and disintegrate,
leaving a mess on your shirts. Store your Shirt Boards in a cool, dry place. On the PRO, the storage
cabinets beneath are provided for your convenience to help you store shirts, inks, etc.
Standard
Over-Sized
Youth
Infant/Misc.
Sleeve