User`s manual

Basic Safety Instructions
Please read this entire Manual before attempting to Print.
Follow all warnings on and about the printer.•
Use the proper power source type indicated on the printer’s label and in this •
manual.
Connect all equipment to grounded outlets. Do not use the same outlet for •
any other system, such as a copy machine, an air conditioning unit or a Heat
Press that may cycle ON and OFF.
Place the printer where the power outlet is easily seen.•
Do not allow the power cord to be damaged.•
If you are using an extension cord, ensure the extension cord’s power •
ampere rate does not exceed that of the printer’s cord.
Keep electromagnetic devices and other potential sources of magnetic •
eldsawayfromyourprinter.
Do not use the printer in locations that have high humidity, shocks, •
vibrations, debris or dust.
Leave enough space around the printer for proper ventilation.•
Do not leave the printer near heat sources such as radiators or heat vents.•
Do not leave the printer in direct sunlight.•
Place the printer on a stable surface that extends beyond the length •
and width of the printer supports. The printer will not work properly if it is
tilted or leaning.
When packing and moving the printer, do not set the printer on its side or •
upside down. This may cause the ink to spill.
Turn the printer OFF before cleaning. Clean with a damp cloth and avoid •
spilling any liquid on the printer.
Caution:
Do not unplug the printer to turn it OFF. Use the power button instead. •
Do not unplug the printer until the Main Power Switch has been turned •
OFF.
Do not block any of the printer’s vents or insert foreign object into its •
slots.
Do not attempt to service the printer yourself beyond the troubleshooting •
techniques covered in this Manual.
Keep the machine on a level surface.•
iii