User`s manual

Problem:
I only use my printer on weekends and many times when I go to use it, the heads
are clogged.
Causes:
Ink is drying within the Print Head due to lack of use.
If you are NOT using your printer on a regular basis, the ink may partially dry
within the Print Head, causing a clog.
We have found the best solution to this issue is to turn your printer ON everyday,
even if you don’t intend to print anything. When the printer is turned ON, it
primes the Print Head during startup. This process is
sufcienttopreventheadclogsifdoneregularly.YouDONOThavetodoa
Head Cleaning unless you want to.
After your printer has gone through its startup procedures, turn it OFF to ensure
the Print Head seats within the Capping Station.
NOTE: Always make sure you observe the proper procedures for powering ON
and OFF your printer to avoid damaging the Print Head.
Problem:
When printing vector graphics, the printed colors do not match the previews in
my graphics application.
Causes:
FastRIP is a bitmap based image processor.
When rasterizing a vector image, FastRIP
TM
must convert a vector graphic into
abitmappedgraphic.Sometimesthetranslationofcolorprolesisnotexact,
resulting in a difference in output.
106
Fast T-Jet Blazer Pro User’s Manual
Platen Gap- STD
INIT Settings- EXEC
Auto Cleaning- OFF
Auto NZL CK- OFF
Sheet Size CK- OFF
Cut Adj- EXEC
Time Out- OFF
PAPER ALGN- OFF
PPR Margin- Default
Code Page- PC437
INTERFACE- Auto
Page Line- OFF
Refresh MRGN- OFF