User's Manual

Screen Service SDT 200UB – SDT 500UB ARK-1 ATSC Operations
July, 2009 v 1.0 Page 3 - 101
No TS Input
• Device in ATSC mode
• Selected TS input not locked.
The No TS Input is an alarm of the Tx ATSC mode. It
should be always enabled in the RF Off alarms mask
while working in ATSC mode.
A
• Check input statistics
X (1)
FPGA Boot alarm FPGA boot has not been successfully completed. I/A
• Restart the machine
• Reload the file system
X (0)
Warm up alarm Temperature level under 5°C or temperature sensor fault. I/A
• Restart the machine
• Temperature sensor fault
0
Notes to the table:
(1) I stands for ITU470 modulator and A stands for ATSC modulator.
(2) 0/1 stands for disabled/enabled and is fixed, X (0/1) stands for not fixed with default value indicated between brackets.