User's Manual

Screen Service SDT 200UB – SDT 500UB ARK-1 ATSC Operations
July, 2009 v 1.0 Page 3 - 109
3.8.15 System Initialization Event
At every system initialization the event System Init is generated.
This event is followed by 25 bytes specifying type and specific code of errors occurred during
system initialization.
Each byte refers to an error as described in the following table:
Table 22. Init system event specific data
Byte Description Errors code
1°
FS_ERR
File System error.
• 0x00: File System ok.
• 0x01: FS partition error (invalid FS).
2°
INFO_ERR
*.cfg file error.
• 0x00: File ok.
• 0x01: File not found or File open error.
• 0x02…0x03: Invalid file (syntax errors).
3°
DEF_ERR
*.def file error.
• 0x00: File ok.
• 0x01: File not found.
• 0x02: File open error.
4°
LCD_ERR
LCD error.
• 0x00: LCD ok.
• 0x01: LCD not found.
5°
PLL_960M_ERR
960 MHz PLL error.
• 0x00: PLL locked.
• 0x01: PLL not locked