User's Manual

ISO 9001:2000 Cert. N°4500/1
Version 1.1 SDT_ARK6_User_Manual_ENG_vATSC Page 117 of 206
Each event type is characterized by a different colour, the following list explain the mean of each colour:
 Red: alarm (refer to alarms list in Alarms paragraph and to Alarms list table);
 Green: command (See ARK6_SW_Reference manual_v1_0.doc for further information);
 Blue: system Init (refer to System Initialization Event paragraph);
 Black:
o Event (refer to Events list table);
o TASK_ERR (refer to Task Error Event paragraph);
o SYS_ERR (refer to System Error Event paragraph).
Use the following buttons, sited on the right side of the window, to manage the Events list:
 Clear: resets the events list.
 Get History: gets all the stored events from the last board reset (max 512 events).
Table 23. Events descriptions list
Description-Event
Event Description
RF OFF enabled from OPTO
RF output switched off through OPTO 0.
RF OFF dis. from OPTO
RF output switched on through OPTO 0.
Stand-by ON from OPTO
Stand-by mode enabled through OPTO 3.
Stand-by ON from LCD
Stand-by mode enabled through LCD button or OPTO 3.
Stand-by ON CPU Fan Err
Stand-by mode enabled because of a CPU Fan error.
Stand-by OFF
Stand-by mode disabled through LCD button.
Power = xx.x dBm (Local)
New output power setting.
xx.x: output power expressed in dBm.
Update file *.xxxx
New file loading.
xxxx: file extension.
P5K open: xx.xx.xx.xx
Connection to port 5000 open.
xx.xx.xx.xx: host IP address.
P5K closed
Connection to port 5000 closed.
File system busy
File system already in use while trying to employ it (e.g. change mode
during a file loading).
Mode = (mode)
Manual change mode.
mode:
 "OFF",
 "ISDBT",
 "ITU",
 "DVB-T",
 "ATSC",
 "DVB-T2",
 "ECHO",
 "Rep. Analog",
 "Rep. Digital".
UTC Time set from GPS
Time and date set by GPS. As soon as the GPS lock is regained,
once lost, and if the current time and date are different from the GPS
ones, the UTC time is set by GPS.