User's Manual

ISO 9001:2000 Cert. N°4500/1
Version 1.1 SDT_ARK6_User_Manual_ENG_vATSC Page 119 of 206
Description-Event
Event Description
In. AUTO switch to string
When Input Select Mode is set on Autoswitch and the selected input
is not locked the device switch to the next available locked input (refer
to Task Error Event paragraph) and this event is generated.
string:
 ASI1
 ASI2
 ASI3
 ASI4
 Tuner
 RxCh1
 RxCh2
Forced = mode
If the device is in Mode A and the selected working mode is disabled
by default (as established in the MODE_DIS field of the *.def file), the
next available working mode is forced.
mode:
 "ISDBT",
 "ITU",
 "DVB-T",
 "ATSC",
 "DVB-T2",
 "ECHO",
 "Rep. Analog",
 "Rep. Digital".
Forced Ch In A= string
Channel input.
Forced ChOut A= string
Channel output.
Forced reset for IIC err
An IIC error forced the board reset.
=>string err status
It notifies witch file generated the Bad file in File System alarm.
string: file extension
status: ON or OFF
ERR on delete file ‘string‘
After a FS file update the old file is renamed and then deleted. This
event is reported when the deletion of the old file during the system
initialization does not succeed.
string: file extension.
Delete file ‘string‘
FS file deleted.
string: file extension.
Init FS date
This event is reported once time and date table of the File System is
initialized for the first time.
Error init FS date xx
An error occurs during FS initialization.
xx: error code:
 0x01: EEPROM data reading error;
 0x02: EEPROM data writing error;
 0x03: CRC error in time and date table.
Error on delete *.string
FS file deleting error.
string: file extension.
S1/S2 changed, P1 loading
Automatic update of P1 symbol. This event is reported at every
system initialization and, in T2-MI mode, when S1 and S2 fields of
incoming T2-MI pkts change.
Saving drlin …
Saving linear coefficients task started (after the command “p2” given
by RS232 or GbE commands).
Saving drlin Finished
Saving linear coefficients task correctly ended.