User's Manual
ISO 9001:2000 Cert. N°4500/1
Version 1.1 SDT_ARK6_User_Manual_ENG_vATSC Page 165 of 206
OID
Name
R/W
Description
1.3.6.1.4.1.21678.311.1.3.1.5
icSourceClkReference
RW
Source clock reference selector
1.3.6.1.4.1.21678.311.2
outputChannels
1.3.6.1.4.1.21678.311.2.1
ocPort
RW
UDP port
1.3.6.1.4.1.21678.311.2.2
ocNumber
R
Number of output Ethernet channels.
1.3.6.1.4.1.21678.311.2.3
ocTable
NA
1.3.6.1.4.1.21678.311.2.3.1
ocEntry
1.3.6.1.4.1.21678.311.2.3.1.1
ocIndex
R
1.3.6.1.4.1.21678.311.2.3.1.2
ocDescr
R
Description of output channel
1.3.6.1.4.1.21678.311.2.3.1.3
ocStatus
R
Tansmission state
1.3.6.1.4.1.21678.311.2.3.1.4
ocDestIpAddr
RW
Destination IP address
1.3.6.1.4.1.21678.311.2.3.1.5
ocDestPhysAddr
R
Destination MAC address
1.3.6.1.4.1.21678.311.2.3.1.6
ocDestPort
RW
Destination port
1.3.6.1.4.1.21678.311.2.3.1.7
ocInputSelector
RW
Input selector
1.3.6.1.4.1.21678.311.2.3.1.8
ocProtocol
RW
Transmission protocol
1.3.6.1.4.1.21678.311.2.3.1.9
ocPckFormat
RW
Packet format
1.3.6.1.4.1.21678.311.2.3.1.10
ocPckPerFrame
RW
Number of TS packets per frame (when the packet format
is 204, the maximum number of packets per frame is 6)
1.3.6.1.4.1.21678.311.2.3.1.11
ocSsrc
RW
SSRC identifier
1.3.6.1.4.1.21678.311.2.3.1.12
ocSourceClkReference
RW
Source clock reference selector
1.3.6.1.4.1.21678.311.2.3.1.13
ocEnable
RW
Transmission enable
1.3.6.1.4.1.21678.313
ssbtT2Modulation
1.3.6.1.4.1.21678.313.1
t2mSettings
1.3.6.1.4.1.21678.313.1.1
t2msUseT2Mi
RW
T2-MI enable 0: disabled 1: enabled
1.3.6.1.4.1.21678.313.1.2
t2msMiPid
RW
T2-MI PID setting
1.3.6.1.4.1.21678.313.1.3
t2msNetworkMode
RW
Transmitter mode selection 0 : MFN 1: SFN
1.3.6.1.4.1.21678.313.1.4
t2msPresetConfig
RW
Enables the use of preset configurations when the T2-MI
is disabled
1.3.6.1.4.1.21678.313.1.5
t2msPresetConfigNum
RW
Configuration number selector
1.3.6.1.4.1.21678.313.1.6
t2msConfigChanged
R
Shows the status of the configuration
1.3.6.1.4.1.21678.313.1.7
t2msLoadConfig
W
Load configuration command
1.3.6.1.4.1.21678.313.1.8
t2msAutoRegen
RW
Enables the Automatic Regeneration function. This
funcion allows to retrieve the configuration
data from the input demodulator and to automatically
increment the REGEN_FLAG field of the L1-Pre
signalling."