User's Manual

ISO 9001:2000 Cert. N°4500/1
Version 1.1 SDT_ARK6_User_Manual_ENG_vATSC Page 31 of 206
5.3 Home Page
Click on Home Page button, highlighted in the next figure, to access the Home Page.
Figure 9. Home Page window
The Home Page provides a general description of the equipment, the firmware updating status and a
subset of commands here below described:
 Modes Management: shows the list of all the available modes, identified by their transmission
standard, and allows to switch between them.
 Station Identifier: shows and sets the station name.
 LCD Standby: enables the LCD Stand-by button.
 Reset: resets the equipment.
 Download Software Standalone: performs a local download of the *.jar file (refer to Download
Software Standaloneparagraph).
 Firmware Updating Status: the three indicators turn into:
o Yellow during FPGA, uC and GPS updating;
o Green when the updating process is finished (FPGA and uC);
o Grey when new code has been loaded (after next system reset).
The progress bars, at the right side of the FPGA and GPS indicators, show the status of firmware
loading process into FLASH. The FPGA and GPS indicators remain yellow until the new firmware
is loaded. When either FPGA or uC indicators turn into green, the transmitter shall be reset in
order to load the new software.
In the Home Page is also specified the installer version the device has been loaded with.