User's Manual
ISO 9001:2000 Cert. N°4500/1
Version 1.1 SDT_ARK6_User_Manual_ENG_vATSC Page 40 of 206
Table 7. CVBS Inputs: Statistics
Box
Parameter / Control
Description
Admitted Ranges / Values
General
A/D PAL
Compensation
Enable the PAL compensation on digitized video. This features
should be enabled only for particular application e.g. the external
ITS insertion in a PAL-M system.
Enabled
Disabled
CVBS 1/2 input
Lock
General input video signal lock, this is on when the following three
signals are locked.
Green: Locked
Grey: Not locked
CVBS 1/2 input
Vertical lock
Shows the locking of the vertical synchronization signal.
Green: Locked
Grey: Not locked
CVBS 1/2 input
Color sub
Show the locking of the color subcarrier signal.
Green: Locked
Grey: Not locked
CVBS 1/2 input
Horizontal lock
Show the locking of the horizontal synchronization signal.
Green: Locked
Grey: Not locked
CVBS 1/2 input
Standard
Shows the detected input video standard. The video standard
detected must be compatible with the modulation defined for the
device, otherwise a “wrong input standard” alarm is raised.
NTSC (M, J),
PAL (B, D, G, H, I, N),
PAL (M),
PAL (Combination-N),
NTSC,
SECAM,
PAL (60)
CVBS 1/2 input
Field rate
Show the rate of video field refresh
50Hz
60Hz